YYP 133 Okpomọkụ akara ule
YYP133 Heat Seal Tester na-emechi ihe nlele ahụ iji chọpụta akara akara nke ihe nkiri bụ isi, ihe nkiri laminated, akwụkwọ mkpuchi na ihe nkiri ndị ọzọ na-ekpo ọkụ na-emechi ihe nkiri dịka achọrọ nke ụkpụrụ ikwu.Ihe akara akara gụnyere okpomọkụ akara okpomọkụ, oge obibi, na nrụgide nke akara okpomọkụ.Ihe mkpuchi okpomọkụ nke nwere ebe mgbaze dị iche iche, nkwụsi ike okpomọkụ, ịdị nro, na ọkpụrụkpụ nke nwere ike igosi njirimara akara okpomọkụ dị iche iche, nke na-eme ka usoro akara dị iche iche.Ndị ọrụ nwere ike nweta ntụzịaka akara okpomọkụ na nke ziri ezi site naYYP133 Okpomọkụ akara ule.
1.Micro-kọmputa njikwa;Ngosipụta LCD;
2.Manu interface, PVC ọrụ osisi;
3.Sistemụ njikwa okpomọkụ dijitalụ PID:
4.N'okpuru okpukpu abụọ cylinder otu akaghị aka;
5.Ụdị mmalite ule abụọ nke akwụkwọ ntuziaka na pedal ụkwụ;
6.Independent okpomọkụ akara nke elu na ala okpomọkụ akara isi;
7.Dị iche iche okpomọkụ akara na-ebupụta ka ịtụ;
8.Tinye ọkpọkọ kpo oku ọkụ site na aluminom;
9.Ntinye ngwa ngwa na nkewa kpo oku ọkpọkọ;
10.Ntube mgbochi ọkụ;
Ọ bụ ọdabara iji chọpụta akara parameters nke plastic film, laminated film, akwụkwọ-plastic mejupụtara film, ngalaba-extruded film, aluminum laminated fim, aluminum foil, aluminum foil mejupụtara akpụkpọ ahụ, wdg The okpomọkụ-akara elu bụ ewepụghị.Okpomọkụ akara obosara nwere ike chepụta na ahaziri pụrụ iche dị ka ndị ahịa chọrọ.Ọ nwekwara ike ịnwale tube dị iche iche na-agbanwe rọba.
ASTM F2029, QB/T 2358(ZBY 28004), YBB 00122003
| Ihe | Oke |
| Mechie okpomọkụ | Okpomọkụ ụlọ～300ºC |
| Izizi njikwa okpomọkụ | ±0.2ºC |
| Oge obibi | 0.1-999.9s |
| Nrụgide obibi | 0.05 MPa～0.7 MPa |
| Mechie elu elu | 180 mm × 10 mm(Nhazi dị) |
| Ụdị okpomọkụ | Ugboro abụọ okpomọkụ elu |
| Nrụgide Isi iyi gas | 0.5 MPa～0.7 MPa(Ndị ọrụ na-akwadebe isi iyi gas n'onwe ha) |
| Isi iyi gas | Ọkpụkpụ polyurethane 6mm |
| Akụkụ | 400 mm (L) × 280 mm (W) × 380 mm (H) |
| Ike | AC 220V 50Hz |
| Nha ịbụ | 40 n'arọ |
